HYPEROXSAN

A blend of POTENTIATED Hydrogen Peroxide STABILISED With Silver Nitrate…

DIRECTIONS FOR USE:

• Raise the water lines to approximately 1 meter off the ground.
• Turn off the water at the source and drain the lines by opening the ends.
• Close the water lines and drainage end and open the maximum level of regulator.
• Prepare 1% stock solution by adding 10 ml Hyperoxsan in 1 liter of water.
• Allow this solution to remain in the water lines for a minimum time of 90 minutes or leave overnight.
• Flush the drinking water lines twice with fresh water.
• In the presence of a flock if, water line cleaning and disinfection are needed, then use 3% stock solution for 30 minutes.